LAUNCH X431 Pro3s Plus Pro3s+ 10.1" OBD2 Diagnostic Scanner ECU Coding X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool

2021 ELITE VERSION SCANNER X431 PRO3S+

* ECU Coding & Online Coding

* OE-Level All systems Diagnoses

* Support OBD I & OBD II Vehicels

* Remote Diagnoses

* 31+ Advanced Functions

* Bi-Direction Control (Active Test)

* Cover 10,000+ models

* 160+ Vehicle Brands covered

* Stable WIFI Connection

* VAG Guided Functions

* Anti-Theft IMMO Service

* Refresh Hidden Features

Full Bi-Directional Control ( ACTVE TEST) of LAUNCH X431 PRO3S+

LAUNCH X431 PRO3S+ scanner is a bi-directional scan tool that can control various sub-systems or components to perform active tests (also known as component tests) like turn fuel pump on/off, cycling the A/C Clutch on/off, EVAP test, windows, doors, sunroofs, wipers, to determine the integrity, monitor the operations to check whether they are functioning properly or not and quickly locate the fault causes.

Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.

Bi-Directional scan tool: with this diagnostic tool’s Active Test, you can output the command into the ECU in order to turn on/off actuators, to find faults in the subsystems of your car effortlessly, without using the vehicle’s control:

[ Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door lock … ]

TPMS Diagnostic function

LAUNCH X431 PROS3+ can work with wireless tire pressure diagnostic tool (optional accessory) toachieve the features of TPMS activation, programming and learning.

a) Activation:to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status.

b) Programming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication.

c) Learning:to write the sensor ID into the vehicle ECU for sensor identification.

31+ Special Reset Service Functions

LAUNCH X431 PRO3S+ scan tool gives you the ability to use dealership level relearn procedures to complete repairs/maintenance: Oil Reset, ABS Bleeding, Injector coding, Gear Reset, SAS Reset, TPMS Reset, DPF Reset, BMS Reset, ETS Reset, AFS Reset, EGR Adaptation, GEARBOX, SUNROOF, SEAT Calibration, etc.

NOTE：

You can find 15 kinds of commonly used reset functions in the reset menu, and other special functions in the car brand diagnostic softwares menu.

1. Oil Lamp, Oil Reset Service

This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.

2. Electronic Parking Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3. Steering Angle Calibration

This function helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

4. ABS Bleeding

This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

5. Tire Pressure Monitor System Reset

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.

6. Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running

7. IMMO Service

It is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8. Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Otherproblems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off

9. Battery Maintenance System Reset

allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

10. Diesel Particulate Filter (DPF) Regeneration

specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

11. Electronic Throttle Position Reset

This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.

12. Gearbox Matching

(1). This function can complete the gearbox self-learning to improve gear shifting quality.

(2). When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.

13. AFS (Adaptive Front-lighting System) Reset

This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.

14. Sunroof Initialization

This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

LAUNCH X431 PRO3S+ Other Functions :

1. Aut VIN Scan

Smart Auto VIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems. Quickly get your car’s information,save your time.

3. Remote Diagnosis

Help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster. If you encounter a diagnostic problem that can not be solved by yourself, you can ask assistance for professional Mechanic.

Users can not only use other diagnostic scanners of the LAUNCH series equipped with this module for remote diagnosis, but also realize the reality of a mechanic through remote control via mobile phones, tablets, computers, etc. It has realized the reality that a mechanic can diagnose an abnormal vehicle which is even thousands of miles away.

4. Health Report Share & Print – ALL MODULE Diagnosis Health Report Share & Print – ALL MODULE Diagnosis

* Easy Data Printing and Sharing
LAUNCH X431 PRO3S + automatic diagnostic scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet (email) and compared or shared with customers.

Note: For technical assistance in setting up the printer or email, please consult us via message or Q/A to provide permanent technical assistance.

* Report printing and upload
After successful completion of the diagnosis, this diagnosis tool can automatically generate a diagnosis report. The generated diagnostic report will be saved and sent to e-mail. You can print a diagnostic report to ask others for help or record historical fault information. With the help of a Wi-Fi connection, you can even upload a diagnostic report and find a solution with people who are familiar with car repairs or who have encountered the same problem.

5. Diagnostic Feedback

If you the scanner can not scan any car system or functions does not support, you can submit diagnostic feedback, then send serial number to us, we will deal the case soon.

6. Data Review

It allows you playback the stored data and diagnostic process, help customer compare current and past data.

7. Ultra Long 200 Feet Wireless Connection:

With an ultra long working range up to 200 feet for wireless connection, LAUNCH X431 PRO3S+ professional auto scanner frees auto technicians.

LAUNCH X431 PRO3S+ Supports car list :

Supports 10000+ car models from America, Europe, Asia (Including Russian car models, Chinese car models, Indian car models, Malaysian car models, Australian car models, Brazilian car models, Latin American car models and other national models，including cars, SUVs, minvans, 12v light-duty trucks, gasoline cars and diesel cars.

For Audi, For BMW, For Rolls Royce , For Mini, For Brillance, For BYD, For Changan, For Changchen, For Changhe Suzuki, For Chery, For Chrysler, For Dodge, For jeep, For Citroen, For Daewoo, For Daihatsu, demo, For DR, For FAW (Tianjin), For Ferrari, For Fiat brazil, For Fiat, For Abarth, For alfa Remeo, For Lancia, For Ford (Australia), For Ford, For Lincoln, For ford(europe), For Foton, For GAZ, Gear Learn, GearBox Learn, For GM(Brazil) ,For GM, For Chevrolet ,For Cadillac , For Buick, For Gonow, For GMW, For Hafei, For Haima, For Holden (Australia), For Honda, For Acura, For Hyundai, For IKCO, For ISUZU, For ISUZU(thailand), For iveco, For JAC, For JAC , For Refine, For Jinlong, For JMC, For Joylong, For Kia, For Land Rover, For Jaguar, For Lifan, For Luxgen, For Mahindra(India), For Maruti, For Maserati, For Maxus, For Mazda, FOR Mercedes-Benz, For Maybach, For MG(SAIC), For Mitsubishi, For MVM, For Nissan, For Infiniti, For GT(Nissan), For Opel, For Vauxhall, For opel(Souch Afria), For Perodua, For Perodua(Malaysia), For Peugeot, For Polarsun, For Porsche, For Proton, For Proton(Malaysia), For Qoros, For Renault, For Dacia, For Samsung Renault, For Rover, For Saab, For Saipa, For Seat, For SGM, For Buick (China), For SGMW, For United Packistan Skoda, For Smart, For Sprinter, For Ssangyong, For Subaru, For Suzuki, For Tata, For Tata(india), For Toyota, For Lexus, For VAZ, For Volvo, For VW, For Bentley, For Bugatti, For Lamborghini, For Xinkai, For Zotye, For ZX Auto, ect...

Support Extension Modules

MORE ADVANCED FUNCTION: SUPPORT EXTENSION MODULES: (you can perform more comprehensive vehicle inspections with LAUNCH X431 PRO3S+)

* Launch Videoscope (Examine unseen parts of engine, such as spark plug holes, engine-cylinder, small parts)

* X431 ADAS MOBILE/ADAS PRO (radar-based driver assistance systems & calibrate a wide range of camera-based)

* X431 TSGUN (Aativate all sensors, TMPS relean, fuek tanks system)

* X431 HEAVY DUTY MODULE (diagnose gasoline vehicles & 24V Diesel Trucks)

* X431 PRO G (Program LAUNCH Sensors）

* X431 Printer (Print out diagnostics data/Reports), And more ..

* BST360 Battery Test

Please note: These tools Need to be purchased separately